NINA 2500 Case Clamp

TECHNICAL DATA:

·        Useful length max.

2500 mm

98.42”

·        Useful length min.

200 mm

7.87”

·        Useful height max.

1250 mm

45.21”

·        Useful height min.

200 mm

7.87”

·        Depth max.

650 mm

25.6”

·        Height of worktop

500 mm

4.75” / 66

·        Pressing strength

0-1300 Kp

19.69”

·        Voltage

230 / 60

·        Installed power

3 kw

3 kw

·        Overall weight

1300 kg

2866 lbs.

·        Space occupied

3800x830x2200

149.6x32.68x86.62”

Three operating modes:

·       MANUAL MODE

o   The manual mode allows the operator to move the different parts of the machine by pushing the relative buttons.

·       AUTOMATIC

o   This is the standard working cycle. The operator inserts the furniture inside the machine ,pushes two-handed buttons and waits until the cycle finished.

·       AUTOMATIC OVERLAPPING TOPS

o   This is a special cycle and the machine needs some optional equipment to do this work.

REGULATION OF PRESSURE

·       To regulate the vertical pressure, turn potentiometer VERTICAL FRAME at anytime.

·       To regulate the horizontal pressure, turn potentiometer HORIZONTAL FRAME at anytime.

Description of working cycle (standard machine):

·       After you insert the furniture inside the machine and press two white buttons at the same time, horizontal frame will descend and touch the cabinet before ascending and positioning itself 1-2 cm from the top of the cabinet.

·       The vertical frame moves the cabinet and start to press the side of cabinet.

·       After that the horizontal frame will press the cabinet from the top.

·       The pressing starts with a low pressure and proceeds to the established time and force of pressing.

·       In case of electricity failure during the pressing, there is no risk because the cabinet stays in position as the machine cannot move.

 FEATURES: