| /

To see all of the FLEXA 507 models and options Click Here for Brochure

FLEXA 507xe RMA10

The NEW Flexa 507xe Series provides users productive solutions with a modest footprint. Designed for medium to large cabinet and millwork manufactures, the Flexa507 features high production features, speeds, and units at an affordable price, while producing consistent results.

Unit 1:  Diamond pre-mill

Unit 2:  Glue applicator and pressure rollers

Unit 3:  Edgebanding trimming guillotine

Unit 4:  (2) motor end trimmer 

Unit 5:  Top and bottom trimmer

Unit 6:  Tilted trimming unit 20˚

Unit 7:  Corner Rounding 

Unit 8:  Edge Scraping

Unit 9:  Glue Scraping

Unit 10: Brushing

TECHNICAL DATA:
·  Working height 8 – 60 mm (0.31- 2.36”)
·  Working height corner rounding 12 – 45 mm (.08 – 1.77”)
·  Coil edge thickness 0.4 – 3 mm (0.02 – 0.11”)
·  Strip edge thickness 0.4 – 12 mm (0.02 – 0.47”)
·  Max overhang top and bottom (total top and bottom) 5 mm (2+3) (0.19”)
·  Min panel width  55 mm (2.17”)
·  Min panel length coil edge 170 mm (6.7”)
·  Min panel length strip edge 250 mm (9.8”)
·  Min distance between panels (12/18 m/min) (550/700) mm (21.6/27.5”)
·  Feed speed (2 feed speed @ 12 & 18 m/min) 12/ 18 mpm (40 / 60 fpm)
·  Glue Tank GP-1100 P XE    
   o   Power 3 kW
   o   Glue capacity 4.8 L  
·  Premill Unit (diamond.)
   o   Removal  .4 – 3mm (0.02 – 0.11”)
   o   Motor power 5.3Hp
   o   Tool height/ diam. 64/ 100mm (2.5” /3.9”)
   o   Tool cutting speed 9,000 rpm
·  End Trimming Unit IK/S     

   o   Motor size (each) 

 0.56Hp
   o   Cutting speed 12,000 rpm  
·  Top and Bottom trimming TS/K
   o   Motor size (each) 1Hp  
   o   Cutting speed 12,000 rpm
·  Tilting Trimming Unit TT/1100 XE    
   o   Motor size (each) 1Hp
   o   Cutting speed 12,000 rpm  
·  Fixed Motor inclination 20˚
·  Corner Round Unit ROUND A2 SUPER XE    
   o   Motor size (each) .55Hp
   o   Cutting speed 12,000 rpm  
·  Edge Scraping Unit SCR/P XE
   o   Knives with Radius 3mm  
·  Brushing Unit
   o   Motor size (each) .2Hp  
   o   Speed 1,400 rpm

 

FLEXA 507xe  RMA10

"UL / CSA" safety standards execution

CA1816   FLEXA 507 XE - RMA-10 (L = 5100)

930715    Voltage 230

931501    Frequency 60 hz

RERS01  Trimmer and edge scraper radius = 1 mm

RERS02  Trimmer radius and edge scraper = 2 mm

CA3657   Electrical version V220 / 230/50/60 Hz

CA3039   Introduction system for narrow pieces

CA3772   Anti-adhesive group "RA"

CA2077  "QUICK SIZE SUPER" device

CA4012   Motor power 4 kW instead of 1.8 kW - V 220/230

CA3773   Diamond tools for gr. rectifier h = 64 Z = 3 + 3

CA4033   Ceramic lamp for infrared panel heating

CA3678   Preparation for PUR glue device with coating slot

CA5002   "IK / S" end trimming horizontal movement

CA3680   "Nesting" copier for TT / 1100 inclined trimmer

CA3700   "Nesting" copying kit for SCR / P (XE) edge scraper

CA3777   Edge finishing kit with nebulizing fluid

CA3778   Kit for delicate edge protection with nebulizing fluid

CA3071   Glue scraper unit "GSU / 2"

CA5004   "F / 1" hot air dryer unit for PVC / ABS edges

CA9064    Pallet for bases L = 5100


MACHINE FEATURES

Standard Features

• Control panel situated at the machine infeed which can be moved to
an ergonomic position.
• Soundproof protection cabinet with polycarbonate windows for
inspection of the units during machining, covered with acoustic
insulation and complete with internal cabinet light.
• Machine base made of bended and welded steel that ensure high
rigidity of the structure. Special openings for out-feed of not
suctioned chips.
• Panel support roller conveyor on entire machine length with
telescopic opening system and sliding wheels made of plastic with
rotating pins made of steel.
• Feeding chain track made of industrial chain with high grip rubber
coated pads. The chain track pads slide on two steel guides, one with
a circular section and one with a flat section, to guarantee feeding
straightness and resistance to lateral loads. Automatic lubrication of
the pads with optimisation of oil quantity according to processed
panels.
• Panel insertion spacer at machine infeed that allows panels to be
inserted at the correct spacing rate (time between panels). Automatic
regulation of the distance according to working speed.
• Upper pressure unit made of bended and welded steel, supported by
steel columns to assure the solid structure on which operating units are
fixed.
Two rows of panel pressure wheels made of high grip rubber sliding on
ball bearings. Guards to cover the wheels.
Electronic lifting of pressure unit according to panel thickness.
• Top operating unit fixed on pressure unit or mechanically connected
onto it, to allow its automatic adjustment according to panel thickness.
Bottom units fixed on chain track beam for a precise reference with
respect to the panel.
High frequency motors with converter (inverter)
Suction hoods of operating units placed on upper side of the
protection cabinet.

In feed and construction

  • Industrial grade in feed system with high grip, interchangeable rubber pads.
  • Guided by a chain for accurate feeding and long lasting perfection
  • Thick, Steel top pressure beam complete with two rows of rubber coated wheels
  • Robust panel support which can be extended according to the size of the parts

MEGA 300 TS Controller

  • 12” color touch screen
  • Sequential motor start
  • Ergonomic positioning
  • Control of glue temp 0º - 45º C
  • Programmable up to 100 programs/ set-ups w/ rapid recall for 6 common programs
  • Pneumatic controls of the units when applicable
  • Graphic representation of all operating unit and on/ off status
  • Guided technical diagnostics
  • Partial and absolute data: number of panels, edgings used, machines use
  • Programmable maintenance alarms

Premilling unit TR/E with “Quick Size” Device

  • Diamond pre-mill unit
  • Electronic pos. of infeed guide
  • Digital readouts for manual copier position
  • Automatic timed intervention
  • 90 mm² max. removable section

          9,000 RPM and 5.3Hp each

Infra-red ceramic lamp for panel heating

  • Pre-heats the panel before glue application

Gluing Unit GP-1100 P XE

  • Four Pressure rollers (1 powered, 2 & 3rd tapered, 4th flat)
  • Teflon coated glue pot w/ < 10 min. heat time
  • Automatic glue temperature regulator to reduce glue temperature if machine is not in use
  • Automatic recovery of glue
  • Automatic loader for strips
  • Pre-melting unit 

         4 Hp w/ 3.3 lb capacity

End Trimming Unit IK/S

  • 2 Independent high frequency motors
  • Pneumatic tilting of the saw blade 0 – 15 deg from control panel
  • Units slide on deticated THK guideways
  • Mounted to the base for vibration free machining
  • Soft/ post –formed panels can also be trimmed
  • Horizontal movement of the unit

          12,000 RPM and .55 HP each

Top & Bottom Trimming Unit “TS/K”

  • Two independent high frequency motors
  • Pneumatic pos. from PLC
  • Vertical revolving copy devices and horizontal copy pads for accurate positioning
  • Digital readouts for positioning
  • Dust extraction hood
  • Nesting copy kit

           12,000 RPM and 1 HP each

 

Tilting Trimming Unit TT/1100 XE

  • Two independent high frequency motors
  • Vertical rotating copying device for perfect adjustment
  • Pneumatic positioning from the unit for
  • Bevel trimming for thin edges (.1 - .6mm)
  • Edge trimming with 2radius (1 & 2 mm)
  • Trimming of solid edges with max. thickness 12mm
  • Different trimming such as radius top straight bottom
  • 4 controlled axis if the unit

 

Corner Rounding Unit Round A/2 Super XE

  • 2 High frequency motors
  • Front and vertical copying devices with chrome plated contact surfaces
  • Pneumatic exclusion & Position from PLC
  • 2 position pneumatic control from control panel
  • Unit can be locked into place to double as a second set of top and bottom trimmer or a fine station

          12,000 RPM and .89 HP each

Edge Scraping Unit SCR/P XE

For finishing edges with radius in PVC/ABS:

  • Rigid structure allows for a perfect finish without any vibration
  • Front and vertical revolving feelers accurately position knives with respect to cutting point, guaranteeing extreme machine precision.
  • Pneumatic exclusion (on/off) from PLC controller
  • Nesting copy kit

Spray mist device for edge finishing

“GSU" Glue Scraping Unit          

 For cleaning and polishing the top and bottom edge.

  • Vertical disk copiers
  • Blowers for cleaning
  • Pneumatic exclusion thru PLC controller

Spray device for delicate panels

“BFN" Brushing Unit      

For cleaning and polishing the top and bottom edge.

  • 2 independent motors, each .3 HP
  • 1,400 rpm rotating speed

Edge brightening unit “F/1”       

For heating PVC/ ABS edging to reactivate the original color

  • Adjustable power up to 3500 W
  • PLC Controlled

 MACHINE ALSO SUPPLIED WITH:

1 ea. USE AND MAINTENANCE MANUAL IN ENGLISH

1 ea. ELECTRICAL SCHEMATIC IN ENGLISH

Note: The pictures and/or illustrations included in this quotation are for descriptive purposes and intended to aid in understanding certain features of the machine.   Some depictions may not reflect the exact construction and may include options that are not part of this offer. In all cases, the written text supersedes any graphic representation. If you have any questions, please consult your sales manager.


Stay connected with our newsletter