GIOTTO

Click here for Brochure

Vitap Eclipse 4.0 Semi Automatic Contour Edgebander

SPECIFICATIONS:

• For shaped "concave, convex" and straight panels 10-60 mm (edging) thickness 1-3 mm band thickness
• Teflon coated glue station (EVA glue) glue pot 1kg
• Quick Removal glue pot system
• Glue and tape application on big and small shaped panels
• Equipped with glue pot with 1 Kg capacity
• 2 rollers to copy the shape of the piece
• -1 tilting support roller to enable the exit of the panel after banding
• Set up of the glue temperature
• Automatic guillotine for coiled material up to 3 mm x 45 mm
• Three types of operations:
• By Encoder
• By Encoder + laser
• By Encoder to overtake the tape to cut it and to heat it
• New laser system for precision cutting to band closed pieces
• Slowing-down feeding speed by foot pedal and laser with external potentiometer and 0,37 motor
• Color Touchscreen 10”
• Trimming station with pneumatic tilting, to allow edge banding of big pieces;
• Trimming unit with 2 motors 0,5 Kw high frequency 15000 RPM with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
• 2 brazed cutters R=3, Z=6
• Raisable working table for small panels
• Holding arm with vacuum table to hold the big panels for edging and trimming
• Dimensions: 2000 x 2000 x 1700 mm • Kg 600
• Reinforced support arm

ELECTRICAL DATA:

• E-Stop on main control panel
• Service, 230 V – 3 Ph – 60 Hz
  

 *All Min and Max radius are affected by the tape thickness, quality and adhesive used.

MACHINE FEATURES

Large Touch screen controller 10” + job list. 

Vacuum is provided via a rotating vacuum table ø 200 mm.

Laser: Measurement to assist encoder for more accurate joint of the tape.

Reinforced joint arm and heavy duty frame construction.

Slow down feeding speed for complex panel. Laser for automatic + variable  speed adjustment by potentiometer.

Trimming station with pneumatic tilting for execution of big pieces.

Glue pot teflon coated 1 Kg.

Holder for edgebanding complete with three feet.

Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:

• 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.
• Large Touch screen controller 10” + job list. 

 Vacuum is provided via a rotating vacuum table ø 200 mm.

 Laser: Measurement to assist encoder for more accurate joint of the tape.

 Reinforced joint arm and heavy duty frame construction.

 Slow down feeding speed for complex panel. Laser for automatic + variable

speed adjustment by potentiometer.

 Trimming station with pneumatic tilting for execution of big pieces.

 Glue pot teflon coated 1 Kg.

 Holder for edgebanding complete with three feet.

Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:

• 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.